Concrete Services

Stamped Concrete Repair

Like all concrete, stamped concrete will need Concrete Contractors Colorado Springs occasionally. Typically, this is in the form of cleaning and resealing.

Surface cracks are a common problem for stamped concrete. Getting them repaired right away will help prevent future damage.

Staining is another big problem for many homeowners with stamped concrete. Often, this is caused by spilling oil or other substances on the concrete.


Stamped concrete, like any other type of paving, will require proper maintenance and upkeep over time. Various factors, including sun exposure, foot traffic, and weather, can cause cracks in your stamped concrete. However, a professional can repair these cracks to restore the beauty of your outdoor patio.

The first step in repairing any cracks in your concrete is to ensure the surrounding areas are free of dirt and debris that will prevent the filler from bonding with the existing concrete. It is also important to ensure the crack has stayed the same since it was originally patched.

If the crack has shifted, it must be re-patched with a structural patch. Once the area has been cleaned and prepared, MatchCrete Clear Concrete Repair Polyurethane can seal the crack. MatchCrete comes in various colors and can be blended to match the color of your stamped concrete closely. Before mixing, add a bit of silica sand (43-30 grit) and a small amount of black, un-sanded tile grout to create a matching color.

Once mixed, the product can be troweled into the crack and allowed to gel before pulling the tape. It is important to remember that when working with concrete repair materials, it is critical to wear eye protection and a dust mask to avoid chemical burns.

A common mistake when repairing cracked concrete is to over-fill the crack. It is important to fill the crack only up to the level of the original concrete surface or even slightly below. That will allow for proper concrete curing and minimize the likelihood of a future problem.

Another common issue with newly stamped concrete is a condition known as tears or crusting. The stamping mats cause these to be pushed down during the concrete stamping process. The forces exerted on the definite cause side-to-side and outward pressure on each “stone” in the pattern pulls the concrete apart, creating the tear or crusting.

A good quality low-solid acrylic sealer will often help alleviate these issues and bring out the color. If this doesn’t work, using a walk-behind sander or buffing machine with a black rough bristle pad will help to smooth and soften the surface.

Staining is a common problem that affects stamped concrete. That can occur due to sun exposition, foot traffic, and external factors. It can also happen when the concrete is not properly sealed.

In most cases, a simple detergent solution is enough to remove these stains from the surface of the concrete. However, if the stain is stubborn, a floor sander may be necessary to remove it completely. The sanding process is done with machinery similar to sanding hardwood floors. It is recommended that homeowners seek professional help if the concrete has to be sanded down for stain removal.

Adding a fresh coat of sealant is an effective way to prevent staining. It is important to reseal the stamped concrete regularly, at least once every two years. Concrete maintenance professionals recommend this to maintain the concrete’s beauty and prevent damage from outside elements.

Applying a decorative overlay to the stamped concrete is also recommended to protect it from cracking and other damages. Overlay is a cement-based product that can be poured over the existing concrete to cover up any imperfections and add extra strength to the structure of the concrete slab. It is an affordable option that a professional concrete contractor can apply.

Discoloration is another common problem that requires stamped concrete repair. Several things, including foot traffic, dirt, mold, and mildew, can cause this. A thorough cleaning with a pressure washer is usually sufficient to eliminate these issues. In some cases, a chemical solution may be needed to remove the stains from the concrete.

Another way to solve this problem is to use a concrete patching compound and an antiquing stain. That is a great way to restore the color of faded concrete and make it look brand new again. The color of the stain must be tested on a small portion of the patio before applying it to the entire surface, as it can change the overall appearance of the stamped concrete.

Like all concrete surfaces, stamped patios and walkways must be properly maintained—regular cleaning and resealing help to keep the surface looking beautiful. However, Mother Nature and everyday use can still take their toll.

One issue that homeowners sometimes encounter with their stamped concrete is water leaks. These are usually caused by damage to the underlying structure or outside pressure on the lines. Leaks can also occur when concrete isn’t installed correctly.

The good news is that concrete slabs can be repaired using various methods, including epoxy injection. The first step is to prepare the leaking concrete surface for repair. That involves removing any loose material and cleaning the area thoroughly to ensure that the patching product bonds well with the existing concrete. Then, a crack-stopping product like Kryton’s Krystol T1 can be applied to the surface. After using it, the surface must be protected from traffic, rain, and freezing temperatures for 24 hours to wet cure.

Another method for repairing stamped concrete leaks is injecting a high-strength epoxy into the cracks. That is done by drilling holes at close intervals or, in some cases, installing entry ports and injecting the epoxy under pressure. That can be a very effective way of sealing leaks in stamped concrete, but an experienced concrete contractor must carry out this type of repair.

If a homeowner notices that their stamped concrete is deteriorating, it may be time to resurface it. That can be done with a cement overlay, an economical solution to replacing damaged concrete. It is important to have a professional contractor install the overlay because it requires a special technique to ensure that the overlay bonds well with the existing concrete.

Staining is a common problem with stamped concrete, especially in areas with a lot of sun. The best way to prevent stains from occurring on your patio is to sweep regularly and clean the surface as soon as possible after a spill or heavy rain. You should also avoid using cleaners or degreasers that contain harsh solvents. In addition, it is a good idea to place drip/spill barriers below furniture and in front of the grills.

The good news is that damaged stamped concrete can often be repaired. It is important to have the concrete resealed regularly to keep it looking its best. When properly maintained, stamped concrete can last for years without showing any signs of wear and tear.

A major concern with stamped concrete is that it can crack or chip, especially if not treated well. That is a normal phenomenon that can be prevented with proper maintenance. It is recommended that the concrete is resealed every two to three years and a protective surface coating applied. That will protect the concrete from dirt, water, and other elements that can cause damage.

If you notice that your stamped concrete has started to chip or crack, it is a sign that it is time for resealing. Getting this done as soon as possible is important to prevent the cracks from worsening. The first step is to remove any loose debris from the area and sweep the surface thoroughly to ensure it is free of any dirt or other materials that could hinder the bonding process. The next step is to clean the concrete using a power washer, followed by scrubbing it with a stiff brush to remove any stains or mold growth that might be present. It is also helpful to remove any de-icing salts used on the concrete.

Once the surface is cleaned and resealed, it can be used again. If you are worried about the cost of resealing, consider hiring a professional to do the work for you. That will save you both time and money.

Stamped concrete is a popular choice for patios, driveways, and other outdoor flooring surfaces because it is durable and affordable. It can be molded to resemble different building materials, such as brick, slate, and tile, and it is available in various colors and textures. It is also easy to maintain, and a simple coat of sealer will protect it from the elements and help it look its best.